CNCRT 70 S2 The Perfect Storm

CNC Router Tips Podcast Season 2 Episode 70: The Perfect
Storm.

The Perfect Storm: CNC Router Tips Podcast Episode 70 Season 2:
CNCRT70S2

Don't Get Caught Without a Backup: Tips for Choosing a PC for
Mach3, Mach4, and Pathpilot.

In this episode of the CNC Router Tips Podcast! We're gonna talk
about how to choose the right PC for running Mach3, Mach4, and
Pathpilot. Whether you're an experienced CNC operator or just
starting out, selecting the right computer is essential to keep
your machine running smoothly and efficiently.With so many options
available, it's easy to get lost in the specs and features. But
here's a word of caution: don't forget to have a replacement PC
ready to go! Long outages can be frustrating and costly, especially
if you're running a business. So, make sure you have a backup
computer ready in case something goes wrong.

In this episode, we'll walk you through the essential requirements
for running Mach3, Mach4, and Pathpilot on your PC.

Live broadcast and free PDF. Register for CNC Side Hustle
Roadmap Wednesday March 15, 2023 at 5:00PM Eastern
https://cncroutertips.com/roadmap

Bill Griggs contact info:
Twitter: @BillGriggs
Website: https://www.cncroutertips.com
SHOW NOTES: https://www.cncroutertips.com/69s2

Key takeaways:

Workholding is essential for CNC router Table success.

Holding multiple parts is more efficient than machining one
parts at a time.

Fixture plates can make work setup easier and more
repeatable.

Vacuum Tables are widely used to hold large parts.

Give Painters tape and CA Glue a try.

Live broadcast and free PDF. Register for CNC Side Hustle
Roadmap Wednesday March 15, 2023 at 5:00PM Eastern
https://cncroutertips.com/roadmap

WEBSITES MENTIONED

Disclosure: Please note that some of the links below are affiliate
links, and at no additional cost to you, I will earn a commission
if you decide to make a purchase. Please understand that I have
experience with all of these companies, books, tools and I
recommend them because they are helpful and useful, not because of
the small commissions I make if you decide to buy something. Please
do not spend any money on these products unless you feel you need
them or that they will help you achieve your goals.



When to choose a Parallel Port:

When to use USB

When To use Ethernet:

Using Pathpilot CNC software.

Mach4 CNC software

External Motion control device:



CNC Side Hustle Roadmap
https://cncroutertips.com/roadmap
The Makers Guide http://themakersguide.com
#CNC Router Tips
https://www.facebook.com/groups/cncroutertips/
Mach3 Software
http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/c/BillGriggs/featured Bill
Griggs contact info:
Twitter: @BillGriggs


Website: http://www.cncroutertips.com
SHOW NOTES: http://www.cncroutertips.com/70S2